The MultiRAE is available in four configurations, each with different kits, outlined below.
MultiRAE Lite
Pumped
MultiRAE Lite
Diffusion
MultiRAE
MultiRAE
Pro
Monitor with sampling mode,
sensors, battery, and wireless
options as specified and
protective rubber boot, external
filter, and belt clip installed
Pumped
Yellow Rubber
boot
Diffusion
Yellow Rubber
boot
Pumped
Yellow
Rubber
boot
Pumped
Black
Rubber
boot
Travel Charger/PC
communications adapter
Yes Yes Yes Yes
AC adapter Yes Yes Yes Yes
Desktop charging / PC
communications cradle
No No No Yes
Alkaline battery adapter
Included with
rechargeable
configurations
only
Included with
rechargeable
configurations
only
Yes Yes
PC communication cable Yes Yes Yes Yes
Calibration adapter Yes Yes Yes Yes
6" flexible probe No No Yes Yes
3 spare external filters Yes No Yes Yes
10 charcoal filters (reduce CO
sensor’s cross-sensitivity to
VOCs)
Yes No Yes Yes
RAE-Sep Tube Cartridges * *
PID sensor cap removal tool Yes No Yes Yes
PID zeroing charcoal filter No No No Yes
Toolkit Yes Yes Yes Yes
QuickStart Guide Yes Yes Yes Yes
Technical Note TN-106 with
ionization energies and
correction factors for 300+
VOCs
Yes No Yes Yes
Calibration and test certificate Yes Yes Yes Yes
Cardboard box with a colorful
Yes Yes No No
Honeywell MultiRAE Series™ 11 User Manual
CHAPTER
3
Standard Contents