Set the Times
Once a trigger occurs, there is a time before a warning is displayed and when the Man Down
alarm is initiated.
Upload Settings to The MultiRAE
When any changes to Man Down (or any other) settings are made in Safety Suite Device
Configurator (SSDC), you must upload them to the instrument in order for them to be used.
Click the “Save” button.
Panic Alarm
When you hold down the [Y/+] key for more than four seconds, the “Panic Alarm!” screen is
shown and the instrument alarms (audible and visible) four times per second.
Press and hold [Y/+] to activate Panic Alarm
Instruments equipped with Wi-Fi also send an emergency message to Safety Suite Device
Configurator (SSDC).
Honeywell MultiRAE Series™ 93 User Manual
To Next Page
Loading...
