Honeywell MultiRAE Series - Remote Alarm Functionality; Instrument Alarm Behavior in Remote Mode

To clear the alarm, press [Y/+].
Remote Alarm
If the instrument supports wireless remote alarm function, the instrument can be trigged to
alarm by Central Hub remotely.
Note: Now only Central Hub support remote alarm function. User can enable/disable this
function in Central Hub setting.
The instrument:
Mode Behavior
UI
(remote
alarm)
Hygiene Mode
(not include Tube
mode)
(LED, buzzer, vibrator) Same as local alarm base on remote
alarm type. The remote alarms have same priority as local
alarm.
See
LCD UI
below
e.g.: Device 1 gas alarmed, it reports to Central Hub, then Central Hub can trig Device 2, Device
3 Remote alarm.
Honeywell MultiRAE Series™ 94 User Manual