Measurement
The submenus for Measurement include Sensor On/Off, Change Measurement Gas, and VOC
and Gamma (if equipped) Measurement Units.
Sensor On/Off
You can turn sensors on or off via this submenu. An “X” in a box to the left of a sensor’s name
indicates it is turned on.
1. Scroll down the list of sensors using the [N/-] key.
2. Add or remove that gas from the list by pressing [Y/+]. An “X” in a box to the left of a
sensor’s name indicates it is selected.
3. Once you have made all your selections, press [MODE] for “Done.”
Honeywell MultiRAE Series™ 83 User Manual
To Next Page
Loading...
