Memory Full Action
When the internal datalog memory is full, the MultiRAE can either stop collecting data (Stop
when full) or go back to the beginning and overwrite the data from the first entry, second entry,
etc. (Wraparound). Memory Full Action can be configured through the instrument, through
Safety Suite Device Configurator or Device Configurator app.
Wireless
When a MultiRAE is equipped with a wireless mesh modem, its settings are controlled via the
menu items under “Wireless.”
Note: Instruments equipped with Wi-Fi provide different menu choices. Refer to page See
"Menus and Submenus" on page70 for more information. for details.
Radio ON/OFF
Turn the radio on or off via this menu.
1. Choose between “On” and “Off” by pressing [N/-].
2. Select the highlighted state by pressing [Y/+].
3. Save or register the change:
l
Press [Y/+] to save the change.
l
Press [N/-] to undo the change.
Honeywell MultiRAE Series™ 101 User Manual
To Next Page
Loading...
