ATTENTION: DES LECTURES HAUTES ET HORS D’ECHELLE PEUVENT INDIQUER DES
CONCENTRATIONS DE GAZ INFLAMMABLES
CAUTION: Substitution of components may impair intrinsic safety.
Note: Users are recommended to refer to ISA-RP12.13, Part II-1987 for general information on
installation, operation, and maintenance of combustible gas detection instruments.
The MultiRAE multi-gas detector must be calibrated if it does not pass a bump test, or at least
once every 180 days, depending on use and sensor exposure to poisons and contaminants.
SPECIAL CONDITIONS FOR SAFE USE
1. The PGM-62xx shall only be fitted with Honeywell Battery Pack type M01-3053-000,
M01-3055-000, or Battery Adapter M01-3054-000 fitted with Duracell MN1500
batteries.
2. The PGM62xx shall only be charged outside hazardous areas.
3. No precautions against electrostatic discharge are necessary for portable equipment
that has an enclosure made of plastic, metal, or a combination of the two, except where
a significant static-generating mechanism has been identified. Activities such as placing
the item in a pocket or on a belt, operating a keypad or cleaning with a damp cloth, do
not present a significant electrostatic risk. However, where a static-generating
mechanism is identified, such as repeated brushing against clothing, then suitable
precautions shall be taken, e.g., the use of anti-static footwear.
The model PGM62xx is certified according to the IECEx scheme, ATEX and cCSAus (for US and
Canada). PGM62xx is intrinsically safe and may be used in hazardous locations.
SUBSTITUTION OF COMPONENTS MAY IMPAIR INTRINSIC SAFETY.
MARKING
The product is marked with the following information:
HONEYWELL
700 Mint St.
Charlotte, NC 28202, USA
Type PGM62x0, PGM 62x6, PGM 62x8
Honeywell MultiRAE Series™ 3 User Manual
To Next Page
Loading...
Need help?
General
