Need help?Do you have a question about the Honeywell 201T and is the answer not in the manual?
General| Target Gas | Carbon Monoxide (CO) |
|---|---|
| Sensor Type | Electrochemical |
| Operating Humidity | 15% to 90% RH (non-condensing) |
| Product Type | Fixed Gas Detector |
| Resolution | 1 ppm |
| Output Signal | 4-20 mA |
| Power Supply | 24 VDC |
| Alarm Set Points | Adjustable |
| Battery Life | N/A (requires external power) |
| Certifications | UL, CSA, ATEX, IECEx |
Procedure for testing the device's functionality using span gas and observing outputs.
Details for setting up the 4-20 mA current sourcing output configuration.
Factory settings and configuration for 4-20 mA output in loop-powered mode.
Diagram and explanation for the 4-wire configuration of the transmitter's output.
Instructions for setting network addresses using dip switches and jumpers on the PCB.
Table mapping network addresses to their corresponding binary addresses.
Details on restocking fees applied to returned products for credit, based on return time.
Specific items and conditions not covered by the limited warranty, including consumables and sensor wear.
Honeywell Analytics' obligations are extinguished by misuse, negligence, or failure to follow instructions.
Disclaims all other warranties, express or implied, not specifically stated.
Limits Honeywell Analytics' liability to the purchase price and excludes consequential damages.
To Next Page