1 - 10
Resetting the Factory Defaults
If you aren’t sure what programming options are in your sled, or you’ve changed
some options and want to restore the sled to factory default settings, first scan
the Remove Custom Defaults bar code, then scan Activate Defaults. This
resets the sled to the factory default settings.
The Menu Commands, beginning on page 6-5 list the factory default settings for
each of the commands (indicated by an asterisk (*) on the programming pages).
This selection erases all your settings and resets the sled to the original
factory defaults. It also disables all plugins
.
Remove Custom Defaults
Activate Defaults
To Next Page
Loading...
Need help?
General
