Need help?Do you have a question about the Honeywell Captuvo SL22 and is the answer not in the manual?
General| Brand | Honeywell |
|---|---|
| Model | Captuvo SL22 |
| Category | Barcode Reader |
| Language | English |
Overview of the Captuvo SL22 Enterprise Sled's features and compatibility.
Step-by-step instructions for installing the sled's battery.
Guide on creating and saving custom default settings for the sled.
Procedure to reset all sled settings back to their original factory defaults.
Configuration of beeper feedback for good reads and error conditions.
Using centering to improve accuracy by narrowing the scan field.
Setting a specific symbology to have higher priority during scans.
Configuring the time duration for searching for high priority symbologies.
Setting whether output data must conform to an edited sequence.
Programming the sled to output scanned data in a specific order.
Enabling the sled to read multiple symbols with a single trigger pull.
Understanding how to add data before or after scanned bar codes.
Step-by-step guide for adding prefixes or suffixes to scanned data.
Instructions for clearing single or all prefixes/suffixes for a symbology.
Overview of the Data Format Editor for customizing output.
Step-by-step process for creating and saving new data formats.
Reference for commands used within the Data Format Editor.
Commands for sending characters or character sequences in output.
Commands for searching for characters or strings within the input message.
Configuring the Data Formatter to modify scanned data output.
Switching data formats for a single scan, then reverting.
Enabling or disabling all supported bar code symbologies.
Enabling or disabling the Codabar bar code symbology.
Settings for Codabar check characters, including validation and transmission.
Enabling or disabling the Code 39 bar code symbology.
Settings for Code 39 check characters, including validation and transmission.
Enabling or disabling the Interleaved 2 of 5 bar code symbology.
Settings for Interleaved 2 of 5 check digits, including validation and transmission.
Enabling or disabling the NEC 2 of 5 bar code symbology.
Settings for NEC 2 of 5 check digits, including validation and transmission.
Enabling or disabling the Code 93 bar code symbology.
Configuring minimum and maximum lengths for Code 93 reads.
Enabling or disabling the Straight 2 of 5 Industrial symbology.
Settings for the Code 128 bar code symbology.
Settings for the UPC-A bar code symbology.
Settings for the EAN/JAN-13 bar code symbology.
Settings for MSI check characters, including types and transmission.
Settings for the GS1 DataBar Limited symbology.
Settings for the Codablock A bar code symbology.
Settings for the QR Code and Micro QR Code symbologies.
Selecting and configuring individual 2D postal code types.
Information on linear postal code symbologies.
Settings for the China Post (Hong Kong 2 of 5) linear symbology.
Explains the conventions used in command descriptions and syntax.
Defines syntax structure, including Prefix, Tag, SubTag, Data, and Storage parameters.
Explains the usage of Tag, SubTag, and Data fields in query commands.
Describes the possible responses (ACK, ENQ, NAK) to serial commands.
Examples of querying default, current, and range values for Codabar settings.
To Next Page
