5 - 20
that supports concatenation of neighboring symbols, and 4) the standard
layout for bar codes on a blood product label. Use the bar codes below to
turn concatenation on or off.
Default =Off.
Code 128 Message Length
Scan the bar codes below to change the message length. Refer to
Message Length Description (page 5-2) for additional information. Mini-
mum and Maximum lengths = 0-90. Minimum Default = 0, Maximum
Default = 90.
Code 128 Append
This function allows the sled to append the data from several Code 128 bar
codes together before transmitting them to the host computer. When this
function is enabled, the sled stores those Code 128 bar codes that start
with a space (excluding the start and stop symbols), and does not immedi-
ately transmit the data. The sled stores the data in the order in which the
bar codes are read, deleting the first space from each. The sled transmits
the appended data when it reads a Code 128 bar code that starts with a
character other than a space.
Default = Off.
Minimum Message Length
Maximum Message Length
To Next Page
Loading...
Need help?
General
