2 - 2
Manual Trigger Mode
When in manual trigger mode, the scanner scans until a bar code is read, or
until the trigger is released. Normal mode offers good scan speed and the lon-
gest working ranges (depth of field).
Default = Manual Trigger-Normal.
Mobile Phone Read Mode
When this mode is selected, your sled is optimized to read bar codes from
mobile phone or other LED displays. However, the speed of scanning printed
bar codes may be slightly lower when this mode is enabled.
Note: To turn off Mobile Phone Read Mode, scan a Manual Trigger Mode bar
code (see page 2-2).
Centering
Use Centering to narrow the sled’s field of view to make sure the sled reads
only those bar codes intended by the user. For instance, if multiple codes are
placed closely together, centering will insure that only the desired codes are
read.
In the example below, the gray area is the full sled field of view and the white
area is the centering window. Bar Code 1 will not be read, while Bar Code 2 will
be.
Hand Held Scanning - Mobile
Phone
To Next Page
Loading...
Need help?
General
