5 - 24
Telepen Message Length
Scan the bar codes below to change the message length. Refer to
Message Length Description (page 5-2) for additional information. Mini-
mum and Maximum lengths = 1-60. Minimum Default = 1, Maximum
Default = 60.
UPC-A
<Default All UPC-A Settings>
UPC-A On/Off
UPC-A Check Digit
This selection allows you to specify whether the check digit should be
transmitted at the end of the scanned data or not.
Default = On
.
Minimum Message Length
Maximum Message Length
To Next Page
Loading...
