OVERLAY,GRAPHIC,NUMERIC FKEY,PC,CK75
OVERLAY,GRAPHIC,ALPHANUMERIC,PC,CK75
Alpha Overlay Alpha Numeric
Overlay
Removal
Using the tip of a small straight bladed screwdriver or other thin edge tool peel back an edge of the overlay from the top
housing. Then grasp that edge with your fingers and remove the overlay.
Installation
1. Select the appropriate replacement overlay.
2. Prior to installing the new overlay ensure that the contact surface area of the top housing is clean and free of any adhesive
residue left over from the overlay that was removed.
3. Remove the adhesive release liner from the new overlay and install the new overlay pressing thoroughly across the entire
area to ensure adequate adhesion.