Honeywell CK75 - Screws

TITLE
Model
DOCUMENT NO.
PAGE
CK75 Repair Manual
CK75
L3-GLBL-RPR-4254
(Rev A)
Page 41 of 42
L3-GLBL-RPR-4516 (Rev A)
OPERATION:
Screws
All the screws for CN75/CK75 series products can be found in below table:
OPERATION:
Example Screws & Torque Settings
50125007-001FRE
FRE, SCREW, M1.2*0.25*5,T4,CS
Secure scan engine to WWAN & scan bracket
0.5kgf-cm
T5 Torx
50124988-001FRE
FRE, SCREW, M1.6*3
Attaches main PCBA to top housing assembly
Attaches WWAN & scan bracket to main PCBA
1.2kgf-cm
#0 Phillips
50124318-001FRE
FRE, ASSY,SCREW,CORNER,EDA50
Attaches the 4 corners of the bottom housing
assembly to the top housing assembly
2.5kgf-cm
T5 Torx
50125025-001FRE
FRE, SCREW,M1.6*5,EDA50
Attaches the bottom housing assembly to the
top housing assembly
1.5kgf-cm
T5 Torx
Honeywell Scanning & Mobility
9680 Old Bailes Road
CN75A CN75E CK75A
1 SUB1-1 super cap bracket to bottom housing 8754-870900-90 48-454397-01 ST1.7*4,PH,PAN,ST,ZB 2 1.4 +/- 0.2 kgf-cm v
2 SUB1-2 IO to bottom housing 8754-870900-82 48-352752-01 UNC#2-56*5/16",PH,PAN,SS,OT,NYLOK 2 2.5 +/- 0.2 kgf-cm v v v
3 SUB2-3 MB to Frame 8754-870900-83 48-352753-01 UNC#2-56*0.125",T7,WFR,SS,NO,NYLOK 4 4.1 +/ - 0.2 kgf-cm v v v
4 SUB2-4 TP bracket to Frame (both side) 8754-870900-84 48-352754-01 UNC#2-56*0.1",T7,WFR,SS,NO,NYLOK 2 1.7 +/ - 0.2 kgf-cm v v v
5 SUB3-1-2 side key pcb to mounting bracket 8754-870900-88 48-454395-01 ST1.7*3,PH,FLT,ST,NI 4 1.4 +/ - 0.2 kgf-cm v v v
6 SUB3-2 antenna to mounting bracket 8754-870900-92 48-454399-01 DST,#2-28*3/16",PH,FLT,ST,ZN 3 2.9 +/ - 0.2 kgf-cm v v
7 SUB3-2 antenna to mounting bracket 8754-870900-88 48-454395-01 ST1.7*3,PH,FLT,ST,NI 2 1.4 +/ - 0.2 kgf-cm v
8 SUB3-3 EA30 scanner to mounting bracket 8754-870900-91 48-454398-01 ST1.7*4,PH,FLT,ST,NI 2 1.4 +/- 0.2kgf-cm v v
9 SUB3-3 N5603 scanner to mounting bracket 8754-870900-93 48-454496-01 ST2.26*4,T6,PAN,ST,CR 2 1.4 +/- 0.2kgf-cm v
10 SUB3-3 EX25 scanner to mounting bracket (both side) 8754-870900-77 48-259374-01 M1.6*0.35*6,PH,PAN,SS,3M2353 2 1.4 +/- 0.2kgf-cm v
11 SUB3-3 EX25 scanner to mounting bracket (top surface) 8754-870900-76 48-258474-01 M2*0.4*6,PH,FLT,SS,PA,NYLOK 2 1.4 +/- 0.2kgf-cm v
12 SUB3-4 camera to mounting bracket 8754-870900-95 48-454676-01 ST1.4*0.45*4,PH,PAN,ST,NB 4 0.9 + /- 0.1 kgf-cm v v
13 SUB3-4 camera to mounting bracket 8754-870900-94 48-454675-01 ST1.4*0.45*2.3,PH,PAN,ST,NB 4 0.9 + /- 0.1 kgf-cm v
14 SUB3-4 heater pcb( only cold storage model have) 8754-870900-94 48-454675-01 ST1.4*0.45*2.3,PH,PAN,ST,NB 2 0.9 + /- 0.1 kgf-cm v
15 SUB3-4 scan handle pcb to mounting bracket 8754-870900-89 48-454396-01 ST1.4*0.45*3,PH,PAN,SS,PA 2 0.9 +/ - 0.1kgf-cm v v v
16 ASM1 KB to Frame 8754-870900-87 48-353087-01 UNC#2-56*3/16",T7,CTS,SS,NYLOK,NEW 4 4.0 + /- 0.2 kgf-cm v v v
17 ASM2 mounting bracket to Frame 8754-870900-80 48-352749-01 UNC#2-56*0.188",T7,PAN,SS,PA,NYLOK 4 2.9 +/ - 0.2kgf-cm v v v
18 ASM3 battery board to frame 8754-870900-87 48-353087-01 UNC#2-56*3/16",T7,CTS,SS,NYLOK,NEW 4 4.0 + /- 0.2kgf-cm v v
19 ASM4 bottom housing to top housing 8754-870900-78 48-352747-01 UNC#4-40*1/2",T10,PAN,SS,ZB,NYS+NYL 8 6.9 +/ - 0.2kgf-cm v v
20 ASM4 bottom housing to top housing 8754-870900-78 48-352747-01 UNC#4-40*1/2",T10,PAN,SS,ZB,NYS+NYL 10 6.9 +/ - 0.2kgf-cm v
21 ASM4 bottom housing to top housing 8754-870900-79 48-352748-01 UNC#2-56*7/16",T7,PAN,SS,ZB,NYS+NYL 2 4.0+/ - 0.2kgf-cm v
22 FINAL ASM SD card cover fasten 8754-870900-86 48-352787-01 UNC#2-56*0.242",SLT,CAPTIVE,ST,ZB 2 4.0+/-0.2kgf-cm v
23 INSP SD card cover fasten 8754-870900-85 48-352756-01 UNC#2-56*3/16",PH,PAN,SS,ZB,NYLOK 2 4.0 +/ - 0.2kgf-cm v v
24 INSP hand strap fasten 8754-870900-81 48-352750-01 UNC#8-32*5/16",SLT,FLT,ST,ZB,HV250° 1 5.8+/-0.2Kgf-cm v
Torque
Use Model
Item
Station
Description
USI RAW PN
Description
Q'ty
USI FRU PN