Honeywell CK75 - Wan;Wifi Antenna

TITLE
Model
DOCUMENT NO.
PAGE
CK75 Repair Manual
CK75
L3-GLBL-RPR-4254
(Rev A)
Page 32 of 42
8. Re-install the core assembly into the top housing.
9. Re-install the bottom housing assembly.
OPERATION:
WAN/WiFi Antenna
The main WAN radio antenna sits on top of the scan bracket assembly. This structure also contains the 802.11 radio antenna. To
remove this antenna you will need to remove the scan bracket assembly.
Tools Required
Description
Part Number
T10 Torx driver
T7 Torx driver
Phillips screwdriver with #1 tip
Parts Required
Item
Part Number
Description
Qty
1
8754-870903-01
WLAN 2.4/5G ANTENNA FOR CK75
1
2
48-454399-01
Screw, DST,#2-28*3/16",PH,FLT,ST,ZN
3
Removal
1. Remove the bottom housing assembly (refer to bottom housing operation).
2. Remove the scan bracket assembly (refer to Scan Bracket Assembly operation).
3. Using a #1 Phillips screwdriver remove three screws the secure the WAN antenna to the scan bracket assembly.
Install screw
(
one each side
)
5