Honeywell CK75 - General Precautions; Safety Training; Quality Training; Product ESD Information

TITLE
Model
DOCUMENT NO.
PAGE
CK75 Repair Manual
CK75
L3-GLBL-RPR-4254
(Rev A)
Page 6 of 42
General Precautions
This symbol within the document represents an important HSE Safety requirement/alert.
This symbol within the document represents an important quality step.
Safety Training
Consult the local HSE Cell Risk assessment to become familiar with any potential hazards while working with the
CK75 Mobile Computer with integrated scanner.
HSE training for this Scanner should include;
 Hand and Portable Tools
 Hazardous Chemical Management
 Laser Safety
 Lead Safety
 PPE
 Safety Awareness
Safety glasses must be worn.
Quality Training
Training per the local Honeywell site for Technicians/Repair personal should include;
 Soldering Verification (add any additional training that would be required)
Product ESD Information
This product contains ESD sensitive components or ElectroStatic Discharge sensitive electronic parts. The
Electrostatic discharge is defined as the transfer of charge between bodies at different electrical potentials. An ESD
event has the ability to modify the electrical characteristics of a semiconductor device, possibly degrading or even
destroying it. ESD also may upset the normal operation of an electronic system, causing equipment malfunction or
failure.
ESD PREVENTION STEPS MUST BE USED DURING ANY REPAIRS OR MODIFICATIONS TO THIS
UNIT. PERFORM ALL WORK AT A CERITFIED ESD WORK STATION.