Honeywell CK75 - Page 36

TITLE
Model
DOCUMENT NO.
PAGE
CK75 Repair Manual
CK75
L3-GLBL-RPR-4254
(Rev A)
Page 36 of 42
L3-GLBL-RPR-4516 (Rev A)
Tools Required
Description
Part Number
T10 Torx driver
T7 Torx driver
Phillips screwdriver with #0 tip
Parts Required
Item
Part Number
Description
Qty
1
8754-870900-44
SCAN ENGINE ASM,N5603,CK75
1
8754-870900-42
SCAN ENGINE ASM,EX25,CK75
1
8754-870900-46
FLEX ASSY, EX25 SCAN,CK75
1
8754-870900-47
FLEX ASSY, N5603 SCAN,CK75
1
2
48-454398-01
Screw, ST1.7*4,PH,FLT,ST,NI
2
Removal
1. Remove the bottom housing assembly (refer to Bottom Housing operation).
2. Remove the scan bracket assembly (refer to Scan Bracket Assembly operation).
3. Using a #0 Phillips screwdriver remove two screws that secure the scan engine to the scan bracket assembly.
The scan engine and scan flex cable can now be removed as a unit. The flex cable can also be disconnected if it needs replacing
or if the scan engine is being replaced.
2
7