Chapter 3 — Printer Configuration
20 PrintPAD Series CN70/70e & CN51 User Guide
Setup Bluetooth Parameters
Radio printers are configured with the default factory settings. To determine
your printer’s radio configuration, print a self
-test. See “Printing a Self-Tes t ” on
page 11. If you have multiple printers, configure them specifically for use in your
environment.
For proper system operation, set the following parameters on your printer and
host computer.
Bluetooth Parameters
• Device Name
• Authentication (This must be set to “Yes” for Android devices, and Windows
7 and above host PCs)
• Bondable
• Discoverable
• Connectable
• Encryption
Contact your network administrator to verify the proper radio settings for your
environment.
Note: The following information applies to printers with Bluetooth capabilities.
To Next Page
Loading...
