EN-4
9. STATUTORY REQUIREMENTS AND REGULATIONS
89/686/EG: European guideline for Personal protective devices (89/686/EG).
Standard EN 14594: Respiratory protective devices — Continuous flow compressed air line breathing
apparatus, Requirements, testing, marking.
System approval by: INSPEC, 56 Leslie Hough Way, Salford
Greater Manchester, M6 6AJ, United Kingdom,
Production control according to article 11B: INSPEC, 56 Leslie Hough Way, Salford
Greater Manchester, M6 6AJ, United Kingdom,
Marks on the system: CE 0194
10. GENERAL
HONEYWELL RESPIRATORY SAFETY PRODUCTS cannot, in general terms, accept responsibility for damage incurred by the owner,
user, other persons using the safety product or third parties, which results either directly or indirectly from incorrect use and/or
maintenance of the safety product, including use of the product for any purpose other than that for which it was supplied and/or the non
compliance or incomplete observance of the instructions contained in this user manual and/or in connection with repairs to the safety
product which have not been carried out by us or on our behalf. Our general sales and supply conditions are applicable to all
transactions. HONEYWELL RESPIRATORY SAFETY PRODUCTS continually strives to improve its products and reserves the right to
change the specifications mentioned in this manual without prior notification.
Warning: The European guideline "Personal Protection Equipments 89/686/EG" stipulates that only inspected protective
bearing the CE mark may be traded and used. Use of substitute, non original spare parts, invalidates the CE approval
and, also, all rights regarding guarantee, whereby the user and, also, the person initially marketing these spare parts,
shall be punished by the relevant authorities of the EEC member countries, whereby additionally, the entire product will
be excluded from use and withdrawn from the commercial transactions respectively. Original spare parts can be
recognized by the affixed code numbers, supplemented with the manufacturer's mark and the "CE approval", possibly
supplemented with a year of applicability
11. GUARANTEE
HONEYWELL RESPIRATORY SAFETY PRODUCTS will repair or, if necessary, replace the product free of charge in the event of a
material or manufacturing defect within 12 months of the purchase date, provided that the product has only been subjected to normal
usage in accordance with the user manual. The guarantee is invalidated if the type or serial number marking is modified, removed or
made illegible.
Products specified in this manual are products of:
Honeywell Respiratory Safety Products, an ISO 9001-certified Manufacturer of Respiratory Protective Devices.
ZI Paris Nord II – B.P. 50288
33, rue des Vanesses
95958 Roissy CDG Cedex
France
Products specified in this manual are manufactured in:
Honeywell Safety Products Slovakia Sro,
Nitrianska cesta 503/60
95801 Partizanske
Slovak Republic
To Next Page
Loading...
