3 - 2
About the Arm Mount Sled
Arm Mount Sled Features
The arm-mounted sled:
• Mounts the Dolphin 70e Black on the user’s left or right arm
• Helps protect the Dolphin 70e Black from impact
• Allows for use of the Dolphin 70e Black display
• Includes an option to support voice applications via an audio cable and headset
• Supports a tethered ring scanner or Bluetooth scanner.
Terminal Features Not Used
When the Dolphin 70e Black is installed in the arm mounted sled, the following features are not available:
• Internal scanner
• Micro-USB port
Remove the Terminal from the Arm Mount Sled
1. If the audio end cap is used, remove the audio cable. To prevent damage to the Dolphin 70e
Black always unplug the audio cable (if used) before removing the end cap.
Scan Button
End Cap
Ring Scanner
I/O Connector
Home Button
Lock
Back Button
Volume Up/Down Buttons
(on left side of sled)
Power Button
(on top of end cap)
Touch Panel
Display
End Button
Send Button
Sled
(not used with ring scanner)
Front Microphone
To Next Page
Loading...
