4 - 6
Developer tools such as APIs for audio and keyboard control are available. Contact Contact Customer Support (page -iii) for
information.
Upgrading Ring Scanner Firmware
It may be necessary to upgrade the ring scanner firmware. To upgrade the firmware you will need:
• EZConfig-Scanning Software
• Interface Adapter (P/N: 8600502ADAPTER) to connect the ring scanner to a PC
• Standard USB-A to USB-B cable
• Firmware upgrade file
To upgrade the ring scanner firmware:
1. Disconnect the ring scanner from the sled.
2. Insert the ring scanner in to the interface adapter.
3. Connect the interface adapter to the PC using the USB cable.
4. Download the EZConfig-Scanning software from the web and follow the Update Firmware instructions in EZConfig.
Installing EZConfig-Scanning from the Web
Note: EZConfig-Scanning requires .NET software. If .NET is not installed on your PC, you will be prompted to install it during
the EZConfig-Scanning installation.
1. Access the Honeywell web site at
www.honeywellaidc.com from your PC.
2. Click on the Products tab. Under Software, select Device Management.
3. Click on EZConfig-Device Configuration Software.
4. Click on the Software tab. Select EZConfig Cloud For Scanning (online version, must register for access) or
EZConfig for Scanning (to install on your PC, follow the next steps).
5. To install on your PC, when prompted, select Save File, and save the files to the c:\windows\temp directory.
6. Once you have finished downloading the file, exit the web site.
7. Using Explorer, go to the c:\windows\temp file.
8. Double click on the Setup.exe file. Follow the screen prompts to install the EZConfig-Scanning program.
9. If you’ve selected the defaults during installation, you can click on Start Menu-All Programs-Honeywell-EZConfig-
Scanning and select EZConfig for your browser.
To Next Page
Loading...
