Honeywell Dolphin 70e - About the Belt Mount Sled; Belt Mount Sled Features; Remove the Terminal from the Belt Mount Sled

3 - 4
About the Belt Mount Sled
Belt Mount Sled Features
The belt-mounted sled:
• Mounts the Dolphin 70e Black on the user’s belt
• Helps protect the Dolphin 70e Black from impact
• Conceals the Dolphin 70e Black display
• Designed for voice applications via an audio cable and headset
• Supports a Bluetooth scanner.
The sled encases the Dolphin 70e Black including the touch panel and helps protect the terminal from impacts.
Terminal Features Not Used
When the Dolphin 70e Black is installed in the belt mounted sled, the following features are not available:
• Touch screen display
• Micro-USB port
• Internal scanner.
Remove the Terminal from the Belt Mount Sled
1. If the audio end cap is used, remove the audio cable. To prevent damage to the Dolphin 70e
Black always unplug the audio cable before removing the end cap.
Front Microphone
Scan Button
Sled
Audio Cable
Lock
End Button
Home Button
End Cap
Send Button
Back Button
Power Button