A - 1
A
Ring Scanner Specifications
8620 Ring Scanner Specifications
Parameter Specification
Dimensions (Typical): 50 mm x 30 mm x 30 mm (2.0 in. x 1.2 in. x 1.2 in.)
Weight: 71 g (2.5 oz.)
Illumination LED:
White LED
Cool white (5700K)
IEC62471: “Exempt Risk Group”
Aiming:
Peak Wavelength Laser
650nm
IEC 60825-1: “Class 2”
Optical Power Laser (CW)
<1mW with a beam divergence of <1.5mRAD (worst case)
Image Size 838 x 640 pixels
Skew Angle +60° typical, 200 lux, EAN/UPC
Pitch Angle +45°typical, 200 lux, EAN/UPC
Motion Tolerance: 580cm (228 in) per second typical on 13 mil UPC/EAN at optimal focus
Minimum X dimension 1D codes: 5 mil
PDF417: 6.7 mil
2D codes: 10 mil
Symbol Contrast 100% UPC: 20% contrast
Temperature Ranges:
Operating
-4°F to +122°F (-20°C to 50°C)
Storage
-13°F to +158°F (-25°C to 70°C)
Humidity 5% to 95% non-condensing @ 50°C
Tumble Exceeds 1000 (0.5 m) tumbles per IEC 60068-2-32 specification
Vibration
Vibration Type: Standard Type
Frequency Range: 2-10 Hz 14mm Pk-Pk, 13-55HZ 1.5mm Pk-Pk, 70-200Hz 2G
Frequency Deviation: 1 octave/minute
Cycle Time for 3 Axis: 2 hours total
ESD Tolerance
+ 20kV Air
+ 15kV Contact
Sealant Rating IP54
To Next Page
Loading...
