To Next PageTo Next Page
Need help?Do you have a question about the Honeywell ADEMCO 6271 Series and is the answer not in the manual?
General| Brand | Honeywell |
|---|---|
| Model | ADEMCO 6271 Series |
| Category | Touch terminals |
| Language | English |
Overview of the TouchCenter's capabilities for security and home control.
Details on security functions like arming, disarming, user codes, and zone bypass.
Lists compatible alarm systems, max TouchCenters, and minimum software revision levels.
Explains the "ECP Error" message and troubleshooting steps.
Criteria and steps for physically mounting the TouchCenter plate.
Instructions for connecting the TouchCenter to the control panel using ECP bus.
Explains the meaning of the ARMED, READY, and TROUBLE/MESSAGE LEDs.
Describes the function, location, and appearance of user-friendly navigation icons.
Requirements for panel programming to enable TouchCenter operation and partition assignments.
Procedure for initial power-up and setting the ECP address.
Steps to change the ECP address for additional TouchCenter units.
How to select the display language (English, Spanish, French).
Step-by-step guide to navigate to the Central Station screen.
Overview of adjustable settings like contrast, volume, and backlight.
Instructions on adjusting the screen contrast using the slide bar.
Instructions on adjusting the sounder volume using the slide bar.
Procedure to set the time interval before the screen backlight turns off.
Procedure to set the time interval before returning to the Home screen.
Steps to configure the system for Daylight Savings Time adjustments.
Procedure to set the current time and date on the TouchCenter.
How to configure chime, voice, and voice chime modes for system feedback.
Steps to access and change the TouchCenter's display language.
Explains the need for user codes and memory capacity for users.
Defines user authority levels and their system function permissions.
Steps to access the user setup menu for managing users.
Step-by-step instructions for adding a new user with name, code, and permissions.
Procedure for removing a user from the system.
Instructions for modifying user settings, excluding the user's name.
General statement that TouchCenter is maintenance-free except for cleaning.
Instructions and warnings for safely cleaning the touch screen.
General care instructions for the keypad and sensors.
Refers to the Control Panel Installation Guide for troubleshooting procedures.
Explains icons shown on the "Arming" screen indicating panel faults.
Overview of diagnostic tests for verifying system operation and connections.
How to select and run individual diagnostic tests like LCD, Audio, and LED tests.
Explains Safe Mode as a backup for communication failures with the control panel.
Describes automatic and manual procedures for entering Safe Mode.
Details the limited functions available and LED behavior in Safe Mode.
Instructions on how to restart the keypad in Normal Mode from Safe Mode.
