TouchCenter Installation and Setup Guide
8–2
Manual Entry
Note: ONLY enter the Safe Mode from the Normal Mode. Entering
the Safe Mode from the Demo Mode may result in incorrect display of
the Emergency Function keys.
To manually put the TouchCenter into the Safe Mode of operation:
1. From the "Home" screen, press the SECURITY button. The "Arming" screen
is displayed.
SCREEN ACTION
2. Press the MORE CHOICES button.
The “More Choices” screen is displayed.
3. Press the SETUP button on the “More
Choices” screen. The “Setup” screen is
displayed.
4. Press the ADVANCED SETUP button.
The Enter Authorized Code:
authorization screen is displayed.
5. Enter your 4-digit Installer code. The
“Advanced Setup” menu screen is
displayed.
To Next Page
Loading...
