TouchCenter Installation and Setup Guide
4–8
How to Set the NIGHT Setup Button Function
The NIGHT button can be set to arm the system in one of five arming
modes:
• Away - When selected, arms all zones with entry delay.
• Stay - When selected, arms perimeter zones with entry delay.
• Instant - When selected, arms perimeter zones without entry
delay.
• Night (Residential Panels Only) – When selected, arms all
perimeter zones plus all zones listed in Zone List 5.
• Maximum - When selected, arms all zones without entry delay.
To set the NIGHT button function, do the following:
SCREEN ACTION
1. On the “Central Station” screen press
the Night Setup button. A Night Setup:
pop-up window is displayed with options
for selecting Away, Stay, Instant,
Maximum and Night.
2. Select the arming mode that will be
activated by pressing the NIGHT button
on the "Arming" screen. Press the Apply
button to accept the setting, or press the
Back button to cancel your selection. In
either case the TouchCenter goes to the
"Central Station" menu screen.
To Next Page
Loading...
