TouchCenter Installation and Setup Guide
4–12
SCREEN ACTION
2. Depress the Back button to return to
the “Central Station” screen or if you
desire to clear the configuration from the
TouchCenter and have it reload the panel
configuration into the TouchCenter from
the panel, depress the Delete button.
After you depress the Delete button, a
confirmation screen is displayed.
3. Select OK to delete the configuration
or Cancel to return to the “Panel
Configuration” screen. If you select OK,
the TouchCenter will be reset and the
panel configuration will be downloaded
from the panel into the TouchCenter. After
the reset and download is complete, the
“Home” screen is displayed.
TouchCenter Setup
Setup allows you to make changes to the way your TouchCenter is
operating. The options that can be changed are:
• Adjust the touch screen contrast
• Adjust the TouchCenter sounder volume
• Change the time interval that must pass prior to the TouchCenter
turning off the touch screen backlight
• Change the time interval that must pass prior to the TouchCenter
returning to the “Home” screen
Additionally, you may enter the User Setup screen, Advanced
Setup screen (if enabled by your system installer), or Clean Screen
(maintenance mode) from the "Setup" screen by pressing the
corresponding button.
Access the "Setup" screen as follows:
1. From the "Home" screen, press the SECURITY button. The "Arming" screen
is displayed.
To Next Page
Loading...
