TouchCenter Installation and Setup Guide
7–2
Diagnostics
About Diagnostics
A series of diagnostic tests are provided that allows verification of
correct operation of the TouchCenter and its connections to the
security system. There are a total of three diagnostic tests.
How to Access the Diagnostics
To access diagnostics, do the following:
1. From the "Home" screen, press the SECURITY button. The "Arming" screen
is displayed.
SCREEN ACTION
2. From the “Arming” screen press the
MORE CHOICES button. The "More
Choices" screen is displayed.
3. Press the SETUP button on the “More
Choices” screen. The "Setup" screen is
displayed.
4. Press the Advanced Setup button on
the "Setup" screen. The Enter
Authorized Code: authorization screen is
displayed.
To Next Page
Loading...
