TouchCenter Installation and Setup Guide
8–4
Operating in the Safe Mode
While in the Safe Mode, the Home screen will display the Security
button, Panic Button, and a message at the bottom of the screen as
shown below:
This is a limited mode of operation. While in this mode:
• You can use the Security button to access the Console Emulation
Mode of operation to try to clear your faults, disarm the system, or
enter additional Alpha Keypad commands specified in your panel
User and Installation Guides. You can perform almost all functions
that you can perform from a standard non-graphic alpha keypad.
• You can depress the “Panic” button and generate Emergency
Messages as defined in the panels home partition for this
TouchCenter.
• The Armed and Ready LEDs on the front of the TouchCenter will
indicate the TouchCenter’s home partition status. The Message (
on
models with Voice feature
) or Trouble (on models without Voice
feature) LED is not active in the Safe Mode.
• The Chime mode will function in the Safe Mode: however, you will
not have Voice, Voice Chime, or Message capability if using the
6271V and 6271CV.
Exiting the Safe Mode
To Exit the Safe Mode:
1. Press the ! SAFE MODE ! bar. You will be presented with the following popup
message:
2. Press the Yes button to return to the
Normal Mode of operation. The
TouchCenter will reset and restart in the
Normal Mode.
To Next Page
Loading...
