Honeywell ADEMCO 6271 Series - How to View Code Authority

TouchCenter Installation and Setup Guide
4–10
SCREEN ACTION
3. Select the level of user who is to have
access to the selected class of screens
and then select the OK button. The
Screen Security screen will be re-
displayed listing the change. Depress the
BACK button to return to the “Central
Station” screen.
Note: The User Levels listed on this screen
match the User Levels in commercial panels.
See the chart below for corresponding User
Levels in Residential Panels.
Residential Panels and Screen Security
Access Level Chosen in TouchCenter Screen Security
Authority Level
in Panel
Matching
Authority
Level in
TouchCenter
Installer Master Manager Operator A Operator B Operator C
System Master Master No Yes Yes Yes Yes Yes
Partition Master Master No Yes Yes Yes Yes Yes
Standard User Normal No No No Yes Yes Yes
Arm Only N/A No No No No No No
Guest Guest No No No No Yes Yes
Duress N/A No No No No No No
How to View Code Authority
The Code Authority button displays a screen that contains the User
Name and Partition Authority Level for the User Code that is
entered. To view the Code Authority level, do the following:
SCREEN ACTION
1. On the “Central Station” screen press
the Code Authority button. An Enter
Authorized Code screen will be displayed.