Honeywell Enhanced Micro TDC 3000 User Manual

Enhanced Micro TDC 3000 User’s Manual 5-43 9/95
5.4.3
- Continue adjustment by pressing the SELECT button.
RGB123
COLOR
53982
SELECT ADJUST
– +
STORE RECALL
When the COLOR indicator lights up, one of the three
indicators (WIDTH, H. CENT, and HEIGHT) lights up. If you press the
ADJUST (+) button, indicator light shifts to the right. If you press the
ADJUST (–) button, indicator light shifts to the left.
(11) RGB Color Balance Adjustment
A. Red of color balance 9300K + 8MPCD Setting
1. Select MODE 2 by the mode selection switch, and press the SELECT button
until the
R
indicator lights up.
RGB123
COLOR
53983
SELECT
MODE
1
2
2. Adjust the red of color balance 9300K + 8MPCD by pressing the ADJUST
button (+) or (–).
RGB123
COLOR
53984
SELECT ADJUST
– +
3. After adjusting the red of color balance 9300K + 8MPCD, if you want to:
- Store the adjusted data, press the STORE button.
RGB123
COLOR
53985
SELECT ADJUST
– +
STORE
- Continue adjustment by pressing the SELECT button.
RGB123
COLOR
53986
SELECT

Honeywell Enhanced Micro TDC 3000 Specifications

General

Brand	Honeywell
Model	Enhanced Micro TDC 3000
Category	Controller
Language	English