Honeywell Enhanced Micro TDC 3000 - Page 126

Enhanced Micro TDC 3000 User’s Manual 5-44 9/95
5.4.3
B. Green of color balance 9300K + 8MPCD Setting
1. Select MODE 2 by the mode selection switch, and press the SELECT button
until the
G
indicator lights up.
RGB123
COLOR
53986
SELECT
2. Adjust the green of color balance 9300K + 8 MPCD by pressing the ADJUST
button (+) or (–).
RGB123
COLOR
53988
SELECT ADJUST
– +
3. After adjusting the green of color balance 9300K + 8MPCD, if you want to:
- Store the adjusted data, press the STORE button.
RGB123
COLOR
53989
SELECT ADJUST
– +
STORE
- Continue adjustment by pressing the SELECT button.
RGB123
COLOR
53990
SELECT
C. Blue of color balance 9300K + 8MPCD Setting
1. Select MODE 2 by the mode selection switch, and press the SELECT button
until the
B
indicator lights up.
RGB123
COLOR
53991
SELECT
MODE
1
2