Honeywell Genesis 7580G - Page 174

11 - 20
*Wait for Trigger Off SNPTRG0 8-2
Wait for Trigger On SNPTRG1 8-2
*LED State - Off SNPLED0 8-2
LED State - On SNPLED1 8-2
Exposure (1-7874 microseconds) SNPEXP 8-2
*Gain - None SNPGAN1 8-2
Gain - Medium SNPGAN2 8-2
Gain - Heavy SNPGAN4 8-2
Gain - Maximum SNPGAN8 8-2
Target White Value (0-255) *125 SNPWHT### 8-3
Delta for Acceptance (0-255) *25 SNPDEL### 8-3
Update Tries (0-10) *6 SNPTRY## 8-3
Target Set Point Percentage (1-99) *50 SNPPCT## 8-3
Image Ship *Infinity Filter - Off IMGINF0 8-4
Infinity Filter - On IMGINF1 8-4
*Compensation Off IMGCOR0 8-4
Compensation On IMGCOR1 8-4
*Pixel Depth - 8 bits/pixel (grayscale) IMGBPP8 8-4
Pixel Depth - 1 bit/pixel (B&W) IMGBPP1 8-4
*Don’t Sharpen Edges IMGEDG0 8-5
Sharpen Edges (0-23) IMGEDG## 8-5
*File Format - JPEG IMGFMT6 8-5
File Format - KIM IMGFMT0 8-5
File Format - TIFF binary IMGFMT1 8-5
File Format - TIFF binary group 4,
compressed
IMGFMT2 8-5
File Format - TIFF grayscale IMGFMT3 8-5
File Format - Uncompressed binary IMGFMT4 8-5
File Format - Uncompressed grayscale IMGFMT5 8-5
File Format - BMP IMGFMT8 8-5
*Histogram Stretch Off IMGHIS0 8-5
Histogram Stretch On IMGHIS1 8-5
*Noise Reduction Off IMGFSP0 8-6
Noise Reduction On IMGFSP1 8-6
Invert Image around X axis IMGNVX1 8-5
Invert Image around Y axis IMGNVY1 8-5
Rotate Image none IMGROT0 8-7
Rotate Image 90° right IMGROT1 8-7
Rotate Image 180° right IMGROT2 8-7
Rotate Image 90° left IMGROT3 8-7
JPEG Image Quality (0-100) *50 IMGJQF### 8-7
*Gamma Correction Off IMGGAM0 8-7
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric entry
Page