Honeywell HCE80 User Manual

Connecting devices (binding)
20
Cancelling the assignment of a room
setpoint generator/sensor of a zone
1
Keep the installation button pressed
for at least 2 seconds in order to
access the installation mode.
The l LED lights up. The LED
of zone 1 flashes green.
2
Press the installation button
repeatedly until the LED of the zone
to be removed flashes red.
3
Keep the Mode button pressed
for at least 4 seconds.
The LED of the selected
zone extinguishes.
The assignment of the room setpoint
generator/sensor has been cancelled.
Cancelling the assignment of the time
program (room setpoint) of a zone
1
Keep the installation button pressed
for at least 2 seconds in order to
access the installation mode.
The LED lights up. The LED
of zone 1 flashes green.
2
Press the installation button
repeatedly until the LED of the zone
to be removed flashes green.
3
Keep the Mode button pressed
for at least 4 seconds.
The LED of the selected
zone extinguishes.
The assignment of the time program
(room setpoint) has been cancelled.
Cancelling the assignment of zones (rooms)

Honeywell HCE80 Specifications

General

Brand	Honeywell
Model	HCE80
Category	Controller
Language	English