Assigning modules and rooms
De-installing the module or room
20
De-installing the module or room
The "De-installation" submenu has the same menu structure as
the "Installation" submenu.
Example: De-installing a shutter module.
► Follow the steps described on
Page 14.
The following text is displayed:
INSTALLATION
DE-INSTALLATION
FUNCTION EXPANSION
SENSOR FUNCTION
► Turn the Dial button until "De-
Installation" is selected.
INSTALLATION
DE-INSTALLATION
FUNCTION EXPANSION
SENSOR FUNCTION
► Press the Dial button.
The following text is displayed:
HEATING
SHUTTERS
DEVICES/LIGHTS
SENSOR
► Turn the Dial button until "Shut-
ters" is selected.
HEATING
SHUTTERS
DEVICES/LIGHTS
SENSOR
► Press the Dial button.
The following text is displayed,
for example:
MODULE-2 *
MODULE-3 *
Only those modules are displayed which have been assigned
beforehand (* next to the module designation).
► Turn the Dial button until the
module to be de-installed is se-
lected, for example:
MODULE-2 *
MODULE-3 *