Assigning modules and rooms
Technical Data
21
► Press the Dial button.
The module is removed from
the list.
MODULE-2 *
The shutter module is de-installed.
Saving and getting system settings
Why save settings?
Always save your settings after you have carried out changes.
This ensures that settings are not lost, even when power fails or
when batteries are flat.
For information on how to save and get the system settings
please refer to the operating instructions of Hometronic Manager
in the "Adapting" chapter.
Restoring the works settings
If you restore the works settings*, all the current adjustments and
assignments such as module names, time programs and Life-
styles* are lost.
In order to use the current configuration later again you have to
save the settings beforehand.
► Change to the "Settings" submenu as described in the operat-
ing instructions of the Hometronic Manager.
► Select "Configuration".
► " Select "Factory setup".
The following text is displayed:
Factory Setup
Actual configuration will
be deleted!
NO YES
► Press the Dial button.
To Next Page
Loading...
