Web Client Operation
102
-13, move the camera to your desired location and then input
e. Click the add button, and you will have set one preset.
input the auto tour value and preset value. Click the add
will have a
dded one preset in the tour.
the assistant item from the dro
pdown list. See Figure 6-14.
In Figure 6
pre
set valu
Auto tour
In Figure 6-13,
button, and you
Repeat the above procedures to add more presets in one tour.
Assistant
You can select
Figure 6-14 Assistant Setup Menu
Color
Click “Color” in section 3, and the interface is shown as Figure 6-15.
st, Here you can select one channel and then adjust its brightness, contra
hue and saturation. (The current channel border becomes green.)
To Next Page
Loading...
