Honeywell HD-16DVR-C - PTZ Trace; Figure 4-29 PTZ Control Menu

Honeywell
51
Here you can set the following items:
 Step: value ranges from 1 to 8.
 8 direction arrows for PTZ position adjustment
 Zoom
 Focus
 Iris
Click the buttons
and to adjust zoom, focus and iris.
Note
Some functions are not supported by some PTZ speed
dome. For example, Zoom, Focus, Iris and Pattern are not
supported by HSPT-120.
Figure 4-29 PTZ Control Menu
PTZ Trace
Please make sure your protocol supports this function. You will need to use
a mouse..
Click PTZ Trace in Figure 4-29, and the system will go back to the single
wind
ow display. Drag the mouse in the screen to automatically activate Pan
and Tilt function, and control the scroll wheel on the mouse to zoom in/out.
Here is a table of front panel key functions in PTZ operation for your
reference.