Overview of Navigation and Controls
42
Note
In “Detect” interface, the copy/paste function is only valid for
the same type, which means you cannot copy a channel
setup in video loss mode to camera masking mode.
Figure 4-19 Menu of Camera Masking
Alarm Setup and Alarm Activation
Before operation, make sure you have properly connected alarm devices
such as the buzzer.
Go to alarm setup interface
On the main menu, from Setting to Alarm, you can see the alarm setup
interface. See Figure 4-20.
Alarm setup
Alarm interface is shown below. See Figure 4-20.
Alarm in: Allows you to select alarm input channel number.
To Next Page
Loading...
