Understanding of Menu Operations and Controls
80
Figure 5-26 Abnormity Setup Menu
Abnormity
Abnormity interface is shown in Figure 5-27.
Event type: There are several options for you such as disk error, no disk
and etc.
Alarm output: alarm activation output port (multiple choices). The 3-ch is
controllable 12V output.
Delay: you can set corresponding delaying time. The value ranges from
10s-300s. The system automatically delays specified seconds in turning
off the alarm output after the system event is stopped.
Show message: the system will send message to local screen to alert
you when alarm occurs.
Send email: the system can send out an email to alert you when the
alarm occurs.
To Next Page
Loading...
