46
Adding a Camera Title Display
On the SPECIAL menu, select CAMERA ID, then press SETUP
(MENU).
CAMERA ID
A B C D E F G H I J K L M
N O P R Q S T U V W X Y Z
a b c d e f g h i j k l m
n o p q r s t u v w x y z
– . 0 1 2 3 4 5 6 7 8 9
( ) CLR POS END
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1. Press the menu control UP, DOWN, LEFT, or RIGHT to select a
character, then press (SETUP) MENU to accept it. The character is
saved and the title cursor at the bottom of the screen moves to the
next position. Use the
( ) symbols to go backward or forward in
the title name/number to make changes. Select CLR to delete the
entire title and start again.
2. Repeat step 1 until your camera title is complete.
3. Select POS to position the camera title on the screen. Select the
position using the menu control, then press (SETUP) MENU to
confirm the position.
4. Select END when you are finished.
To Next Page
Loading...
Need help?
General
