You must add user names and other information into the data-
base before you begin testing.
To add users to the database:
1. Open program by clicking the VeriPRO icon.
2. At the welcome screen, click Continue. This brings you to the
Main Menu screen.
3. Click the Toolbox icon in the top right corner.
4. Enter the Administrator Password into the pop-up box. Type the
word “password” for your initial log-in, then change the
password to your own preference. This password is encoded and
cannot be retrieved by anyone but you.
5. Click Manage Users.
6
To install the VeriPRO software onto your computer:
1. Insert the VeriPRO CD into your computer’s CD drive.
2. Double-click on the My Computer icon on your desktop or in
your Start menu.
3. Access your CD drive by clicking on the D:\ drive icon.
4. Double-click on the VeriPRO icon to begin the installation
process.
5. Follow the on-screen instructions to install VeriPRO in the
directory of your choice.
2.1 Install & Register Software 2.2 Managing Users
To Next Page
Loading...
