Honeywell ms2420 - General Precautions

6
General Precautions
The following are some general precautions to remember when handling your MS2420/MS2430 series
scanner.
Do not turn the unit upside down with the platter in place.
Do not press on the window in the replacement platter
or the vertical window frame.
Platter Removal
No hardware or tools are required to remove the platter
(see Figure 4). Refer to the Maintenance section of
this manual for additional information on platter
replacement.
Note: See caution statement on page 5.
Finger Recesses
Rest both thumbs against the vertical window frame for
added stability when lifting the unit by the finger
recesses.
Figure 5
Figure 3
Figure 2
Figure 4