5 - 48
Peripherals
This panel is used to enable and disable the touch screen heater and scan window heater, flashlight time delay to Off, and
GPS On/Off.
Settings have no effect if module is not installed.
Heaters
Note: Settings have no effect if the touch screen / scan window heaters are not installed.
Tap the radio button to enable or disable the heaters.
Setting Default
Heaters
Touch screen heater Enabled
Scan window heater Enabled
Flashlight
Turn flashlight off after 1 minute
GPS
GPS Power On when installed / Off when not installed
To Next Page
Loading...
