2 - 13
Body Worn Accessories
Protect the Touch Screen when using a Holster / Carrycase .
Holster without Handle
The MX9 is inserted upside-down in the holster with the touch screen facing the belt connecting the holster to the body.
Holster with Handle
The MX9 is inserted upside-down in the holster with the touch screen facing the belt connecting the holster to the body.
Guide the installed trigger handle into the trigger handle notch.
Carrycase
Remove the hand strap components from the MX9. Open the zippered case until there is enough space to insert the MX9
into the case. The touch screen must face forward so it, and the keypad, are visible through the windows in the carrycase.
Close the zippers. If desired, attach the hand strap components to the zippered case.
To Next Page
Loading...
