5 - 17
Lock
Password
Set the lock / unlock behavior for the MX9.
Prompt if phone unused for
Tap the check box to enable (checked) and set the inactivity timeout before the MX9 locks.
Password Type
When selecting a Password type the screen displays a numeric keypad or the input panel depending on the type of
password selected.
Select the Password type, Simple PIN (numeric) or strong alphanumeric. Enter the desired password and confirm.
Note that Windows Mobile places restrictions on what it considers a valid password. If the chosen password is not
strong enough, a warning is displayed and a new password should be entered and confirmed.
Note: After a password has been entered, the password must be used to access the Lock panels again.
Setting Default
Prompt if device unused for Disabled
Timer 0 minutes
Password type Simple PIN
Password <blank>
Confirm <blank>
Hint <blank>
Display Windows Classic
To Next Page
Loading...
