4 - 2
The MX9 will only resume from a suspended state if an interrupt occurs and the CPU has been programmed to wake when
an interrupt occurs. An interrupt from any listed device transitions the OS back to the On state.
Suspend Primary Wake up Events
Wake up Events - all configurable via command line utility:
• Power key
• Touch screen
• Any integrated keypad touch
• Bluetooth connection capable
• USB client connection
• COMM CTS - Serial port handshaking - i.e., tethered scanners generate CTS which could wake up the unit
• Trigger pull (MX9with integrated bar code decoder only)
• Internal serial port device interrupt (WAN, etc. - only devices capable of signaling an interruptible GPIO, and that have
a separate power supply)
To Next Page
Loading...
