8 - 8
Data Options Tab
Bar code manipulation parameter settings on this tab are applied to the incoming data resulting from successful bar code scans
sent to the MX9 for processing.
Note: The Data Options tab contains only those options available for one type of decoding engine.
The Data Options tab contains several options to control bar code processing. Options include:
• Defining custom Code IDs.
• Disable processing of specified bar code symbologies.
• Rejecting bar code data that is too short or too long.
• Stripping characters including Code ID, leading or trailing characters and specified bar code data strings.
• Replacing control characters.
• Adding a prefix and a suffix.
For MX9 with Symbol Decoding Engine
Data Collection Wedge can only enable or disable the processing of a bar code inside the Wedge software.
Enabling or disabling a specific bar code symbology at the scanner/imager is done manually using the configuration bar code in
the Integrated Scanner Programming Guide.
Setting Default
Enable Code ID None
Symbology Settings All
Control Character Translate All Disabled
Custom IDs Name blank
HHP Properties (Hand Held
Products)
Options Disabled:
Centering
DecodeMode
LinearRange
AimTimer
LeaveLightsOn
To Next Page
Loading...
