5 - 88
6. Tap the OK button to dismiss the About CERDisp dialog box on the MX9 desktop by tapping the OK button in the
HSM Connect window on the PC desktop. The dialog box automatically times out and disappears after approxi-
mately 20 seconds.
7. The MX9 can now be configured from the HSM Connect window. Input from the PC’s mouse and keyboard are rec-
ognized as if they were attached to the MX9.
8. When the remote session is completed, terminate the HSM Connect program by selecting File > Exit or tapping on
the X in the upper right hand corner to close the application, then disconnect the ActiveSync cable.
To Next Page
Loading...
