8 - 18
Code 39- Advanced Properties
Check Character
Required – When enabled, the check character is required. Default is disabled.
Transmit – When enabled, the check character is transmitted. Default is disabled.
Transmit Start / Stop Character – When enabled, the start / stop characters are transmitted. Default is disabled.
Full ASCII – When enabled, full ASCII interpretation is used. Default is disabled.
Append – When enabled, append and buffer codes that start with a space. Default is disabled.
EAN 8 - Advanced Properties
Transmit Check Character – When enabled, transmit the check character. Default is enabled.
Addenda
Read 2-Digit – When enabled, transmit the 2 digit addenda. Default is disabled.
To Next Page
Loading...
